GENERAL CHARACTERISTICS

This alloy is self-fluxing on copper to copper joints. It can be applied with the oxy/fuel torch, induction, furnace or any other suitable means of heat.

TYPICAL APPLICATIONS: Loose fitting joints (.003" to .006).

Technical Data:

Diameter..

1/8"

Liquidus

1465o F

Solidus1190o F

Brazing Range1300 1500o F

Procedure:

The joint should be clean and free of foreign matter. Use a slightly carburizing flame keeping the torch in motion. When the flux liquefies, add filler metal and allow it to flow throughout the joint. Remove flux residue with a wire brush and hot water.